Laboratory
Bitrode is an industry leading supplier of state-of-the-art laboratory systems in cell, module and pack testing for all chemistries.
Our full range of products— from Cycle Life Testers for R&D of multiple chemistries and applications to High Rate Discharge testers for cold crank testing—are configurable for testing to industry standards such as IEC, SAE, BCI and drive simulations for FUDS, SFUDS, GSFUDS, DST and ECE-15L. Additional standard product offerings for battery development and testing, as well as custom engineering services, offer our clients maximum control over every aspect of their testing protocols and methods.
Cells:
MVC |
EV/HEV Cell Battery Testing Systems
Voltage: 0-18V
Current: 1µA-300A (2700 in parallel)
Circuits: up to 96
Network: Ethernet |
|
CV |
Automotive & Industrial Cycle Testing
Voltage: 5-18V
Current: 0-100 (1600A in parallel)
Circuits: up to 48
Network: Ethernet |
|
Modules:
LCV |
Full-Featured Battery Testing System
Voltage: 0-200V
Current: Up to 1000A (8000A parallel)
Circuits: up to 16
Network: Ethernet |
|
FTV |
EV/HEV Battery Module Test System
Voltage: 0-100V
Current: Up to 1000A (2000A parallel)
Circuits: up to 4
Network: Ethernet |
|
LCN |
Life Cycle Module Testing
Voltage: 0-100V
Current: up to 1000A
Circuits: up to 21
Network: Coax |
|
|
Packs:
FTF |
High Power & Voltage Pack Testing
Voltage: 35-500V / 40-700V / 50-1000V (Zero Volt optional)
Current: up to 1000A (4000A in parallel)
Circuits: up to 2
Network: Ethernet |
|
FTF-HP |
High Power Laboratory Testing System
Voltage: 33-500V / 40-700V / 50-1000V (Zero Volt optional)
Current: up to 1000A (4000A in parallel)
Circuits: up to 2
Network: Ethernet |
|
FTF-HV |
High Voltage Pack Testing System
Voltage: 100-1500V
Current: up to 1200A (2400A in parallel)
Circuits: up to 2
Network: Ethernet |
|
|
Chargers:
LCR |
Constant Potential Charging System
Voltage: 0-72V
Current: 0-150A
Circuits: up to 1
Network: Coax |
|
LCRN |
Constant Potential Charging System
Voltage: 0-18V
Current: 0-300A
Circuits: up to 5
Network: Coax |
|
Dischargers:
DTV |
High Current Discharge Battery Testing
Voltage: 0-72V
Current: 0-3000A
Circuits: 1
Network: Ethernet |
|
|
Reserve Capacity Testing:
RCV |
Multi-Circuit Discharge Testing
Voltage: 1.5-36V
Current: 0-50A (800 in parallel)
Circuits: up to 16 (32/cabinet)
Network: Ethernet |
|
RCN |
Stand Alone Discharge Testing
Voltage: 5-120V
Current: 0-600A
Circuits: up to 12
Network: Coax |
|
Water Bath:
WB |
Temperature Controlled Water Bath
Temp Control: up to 80 degrees C
Current: 21A
PSI: 5 (min)
Phase: 1 |
|
|