Laboratory

Bitrode is an industry leading supplier of state-of-the-art laboratory systems in cell, module and pack testing for all chemistries.

Our full range of products— from Cycle Life Testers for R&D of multiple chemistries and applications to High Rate Discharge testers for cold crank testing—are configurable for testing to industry standards such as IEC, SAE, BCI and drive simulations for FUDS, SFUDS, GSFUDS, DST and ECE-15L. Additional standard product offerings for battery development and testing, as well as custom engineering services, offer our clients maximum control over every aspect of their testing protocols and methods.

Life Cycle Testing

Cells:

• • MCVEV/HEV Cell Battery Testing System
    Voltage: 0-18V
    Current: 1µA-300A (2700 in parallel)
    Circuits: up to 96
    Network: Ethernet

  • CVAutomotive & Industrial Cycle Testing
    Voltage: 5-18V
    Current: 0-100 (1600A in parallel)
    Circuits:up to 48
    Network:Ethernet
    

Modules:

• • • • LCVFull-Featured Battery Testing System
        Voltage: 0-200V
        Current:Up to 1000A (8000A parallel)
        Circuits:up to 16
        Network:Ethernet

      • FTVEV/HEV Battery Module Test System
        Voltage: 0-100V
        Current: Up to 1000A (2000A parallel)
        Circuits: up to 4
        Network: Ethernet

         

      • LCNLife Cycle Module Testing
        Voltage: 0-100V
        Current: up to 1000A
        Circuits: up to 21
        Network: Coax

Packs:

 

• FTF High Power & Voltage Pack Testing
  Voltage: 35-500V / 40-700V / 50-1000V (Zero Volt optional)
  Current: up to 1000A (4000A in parallel)
  Circuits: up to 2
  Network: Ethernet

   

• FTF-HP High Power Laboratory Testing System
  Voltage: 33-500V / 40-700V / 50-1000V (Zero Volt optional)
  Current: up to 1000A (4000A in parallel)
  Circuits: up to 2
  Network: Ethernet

   

• FTF-HV High Voltage Pack Testing System
  Voltage: 100-1500V
  Current: up to 1200A (2400A in parallel)
  Circuits: up to 2
  Network:Ethernet
  

 

Chargers

• • • LCRConstant Potential Charging System
      Voltage: 0-72V
      Current: 0-150A
      Circuits: up to 1
      Network: Coax

       

    • LCRNConstant Potential Charging System
      Voltage: 0-18V
      Current: 0-300A
      Circuits: up to 5
      Network: Coax

Dischargers

• • • • DTVHigh Current Discharge Battery Testing
        Voltage: 0-72V
        Current: 0-3000A
        Circuits: 1
        Network: >Ethernet

Reserve Capacity Testing

 

• RCVMulti-Circuit Discharge Testing
  Voltage: 1.5-36V
  Current: 0-50A (800 in parallel)
  Circuits: up to 16 (32/cabinet)
  Network: Ethernet

   

• RCNStand Alone Discharge Testing
  Voltage: 5-120V
  Current: 0-600A
  Circuits: up to 12
  Network: Coax

 

Water Bath

 

• WBTemperature Controlled Water Bath
  Temp Control: up to 80 degrees C
  Current: 21A
  PSI: 5 (min)
  Phase: 1